Features

Q.What are the features of the Bluetooth Advertising Firmware ?

Bluetooth Advertising Firmware Features are:


Supported Hardware
- 3G/GPRS Support. (on supported 3G modems)
- WiFi Support. (on supported WiFi Adapters)
- Supports Extended range Bluetooth dongles
- Supports up to 16 Bluetooth dongles per one device, i.e. 105 simultaneous connections.
- Supports USB Hubs
- Almost, able to be installed on any x86 PC architecture
- Support sending to a wide range of mobile handsets (including smart phones and PDAs and Laptops ) see the supported mobiles click here http://docs.google.com/Doc?id=dmsm37v_390dh5df3ck
- Supports uploading campaigns through flash memory USB
- Firmware could be easily installed in Laptops, Nettops, Netbooks and Thin client PCs
- Firmware could be installed on CF cards
- Firmware could be installed on SD cards


Mobile Blocking Features
- Ability to block sending to mobiles on a given number of rejection trials.
- Ability to block sending to mobiles on a given number of time out trials.
- Ability to block sending to mobiles on a given number of success trials per device.
- Ability to block sending to mobiles on a given number of rejection trials per campaign.
- Ability to set maximum number limit of sending a certain campaign . i.e. send a campaign XXX numbers of times


Bluetooth Sending Features
- Ability to send multiple files in one shot.
- Delivers advertising content to many Bluetooth devices at the same time
- Advanced controls of range (using RSSI ) configuration / timeout / delay control (On rejection / acceptance / Time out)
- Enhanced coupon campaign in the stand alone mode i.e. if you uploaded 1000 different coupon you will be able to send each one to a unique handset.
- Ability to set Lucky Hour Promotion by setting a specific Hour of sending your promotion or setting coupon campaign with time constrains.
- Automatic authentication (no pairing required)
- Support pin number “1234”
- Sending on stand alone mode runs with or without a network connection

Statistics Features
- Advanced (Rejection, timeout, success) graphical statistics reporting tool.
- Download the Statistics file of the succeeded and failed sent (this shows the MAC address of each mobile accepted or rejected the content)


Features related to the Network mode
- By one click, you can shift from Stand Alone mode (LongArm) to Network Mode (Octopus Server Required)
- Zoning and grouping (Arrange more than a device in group or zone) – on it network mode (Octopus Server Required) -
- Zones and groups can configure for different configuration templates for different group names and extra tweaks. (Octopus Server Required)
- Enhanced coupon campaigns in Network mode (As in the network mode “Octopus” the decision making is at the level of the server and not at the node level – i.e. Coupons do not duplicate on the whole network while sending- )……..(Octopus Server Required)
- Can assign users to view specific campaigns for more credibility to sell air time……… (Octopus Server Required)

Installation, Security & Support features
- Firmware is easy to install, almost Plug and Play
- Easy remote maintenance for devices (software updates / shutdown / reboot) at your fingertips.
- Firmware automatically updates its self (just need to plug it to the internet)
- Ability to back up your Bluetooth advertising campaign.
- Firmware Control Panel is accessed through Ethernet connections. By plugging the Cross-Over cable between your PC and the Bluetooth device. Or through regular network cable using a 4 port switch for an example.
- Ability to assign IP address with DHCP or Manually.
- Ability to view the IP address by plugging a screen to the VGA I/O
- Firmware programmed in Linux
- Online remote support is available.
- Firmware interface is password protected

How to install
1. Use our Wiki Manual
2. Download Installer Software from the next tab
After you download iBlue installer CD, Burn it as a bootable CD, then restart your target PC and set your bios to boot from the CD
3. This is how the installer works.

4. After you finish installation, Restart the target device, make sure that it is connected to the internet as you are now preparing to activate the software

5. After purchasing an activation key you can view them from our website

6. Here is how the software activation looks like

7. Now connect your target device to your PC using a cross-over cable and open your browser, then upload your campaigns

Download

Warming: installers will erase/format all content of the hard drive media.

File iBlue CD Installer Version 11_4_2010 Description This copy suitable for any PC View Documentations

Demo

Demo of Bluetooth Advertising CMS

iBlue Bluetooth CMS tour :
YouTube video: http://www.youtube.com/watch?v=OMNUJYaeJdM